Pages

Sunday, July 27, 2014

Investigating the Visual System with MEM Retinoscopy

We have discussed the symptoms that clue you in to an investigation for visual system inefficiencies, but what tests during your examination yield the most useful information?  In the coming posts we will be diving in to Dr. S’s normal and preferred battery of testing for a visual system evaluation.  Today’s topic: near retinoscopy and what it can reveal about the patient’s focusing system strength and ability.

MEM Retinoscopy

When: All patients under age 18, adults that are in school or are complaining of fatigue with near work (under age 40 when that would be atypical).

Why:  MEM stands for Monocular Estimate Method and is a dynamic retinoscopy, meaning the patient is doing an active visual process while being observed.  Unlike standard retinoscopy that we use to find a distance prescription, MEM retinoscopy reveals the focusing system’s work or effort (accommodation).  Ideally the patient will under-accommodate for a target; +0.50D to +0.75 “lag” of accommodation at near is considered normal.  A higher than normal lag of accommodation means that the focusing system is under-accommodating at an abnormal level, and a “lead” of accommodation means that the system is over focusing.  The lead or the lag is not the real problem, but an adaptation of the visual system to deal with excessive visual strain.  It is quite common for people with binocular visual issues to develop accommodative lag or lead to compensate for their focusing inefficiency.  For example, a patient with esophoria (an over-convergence of the eyes when focusing together) may have a high lead of accommodation at first because their accommodative and vergence system are over-acting due to the stress on the system. When this finally takes a toll on the eyes, a high lag forms in an effort to reduce the action and reduce the stress.  Dr. S sums it up nicely when she says “it's not the lag or lead that causes the stress - it's the lag or lead that occurs because of stress.”  Don’t view a lag or a lead of accommodation as the problem, but evidence that a problem exists that the patient’s focusing system is fighting to overcome.

How: We are measuring the person’s near focusing system response, so we need to get as true a measurement as possible of what real life is like for them.  That means the patient should wear their glasses prescription, and the near target should be held at the patient’s working distance (called the Harmon distance in the optometry world) .  A great way to do this is to hand the patient a book or magazine, and not say anything leading about where to hold things.  Just see where they hold things naturally, and take a measurement of this distance.  This is where you will hold your retinoscope with you are ready to start the test. On average we would expect a 40 cm working distance for adults, but depending on the person's arm length or the age of the child, it might be closer or farther.

The ideal target stimulus is the age appropriate MEM retinoscopy cards that usually come with your scope set when you purchased them at school.  They are arranged with varying degrees of difficulty that you can select based on the patient’s grade level.  In very young children the picture card would be most appropriate. Remember, you want the patient actively engaged, so if they seem bored or reading too quickly it could mean that your target is too easy.  Stop and go up to the next difficulty level.  With the picture cards you can even make a matching game by telling the child to “find the bicycle” or “find the cake”.  You need to measure your patient’s response during the “finding” part and not when they have found the target to get meaningful data, so you have to be on your toes with this method.
 
MEM Retinoscopy Cards via
With your retinoscope in one hand, held at your patient's working distance, your other hand is now going to be ready to “dip” trial lenses in place to neutralize the reflex.  You only want to keep a lens in place for about a second at a time to not disrupt the patient’s response, so again this is an act-fast skill.  Dr. S has developed a great way of quickly collecting data, just by using a single +1.00D trial lens:

STREAMLINED MEM METHOD WITH JUST 1 TRIAL LENS
  • 1) Dip +1.00 in front of the patient while they are reading.  Did you see with or against?
    • If you saw with, then you know they have a higher than normal lag (at least +1.25 or higher)
  • If you saw against, then do a quick retinopscopy sweep of the eye without any lens in place
    • If you saw with, then you know they are normal
    • If you saw no motion or against, you know they have a lead in accommodation
Exact quantification is not necessary on this test, bracketing is really your best friend to make MEM retinopscopy both efficient and informative.  Remember, when assessing accommodation with this method you are just trying to assess if the accommodation to the target is normal, and if it is abnormal, is it a lag or a lead?  This information tells you if the visual system is compensating for another problem that you need to uncover and explore, and is not an end point to your investigation.

Since your patient is actively reading or playing a “finding” game during the process, your results are tied to the patient’s behavior.  If you find the lens required for neutralization fluctuates, this could be a hallmark of accommodative spasm.  Fluctuation can also be a product of the patient’s lack of attention though.  The target you use is very important due to this – make sure it is not too hard and not too easy because the effort involved to focus can be swayed by this difficulty level.


What Did You Learn?

Expected results for a normal accommodative response is +0.50 to +0.75 lag of accommodation at a 40 cm working distance.  In presbyopes, you would expect the response to be whatever their near add is for that person (it doesn't make much sense to do this for presbyopes, honestly, unless you want to find an add in a more creative way haha).  If your results do not reveal this normal lag range, then there are a number of possibilities that could be on your differential:

High Lag ( >+1.00):
            -Accommodative dysfunction
            -Presbyopia or pre-presbyopia (if around 40)
            -Uncorrected or under corrected hyperopia
            -Over minused patient
            -Esophoria with insufficient vergence (patient under-accommodates to keep fusion)
            -Patient wasn’t paying attention during the test or the stimulus was too easy
           
Lead of accommodation (<+0.25D or if you neutralized with no lens in place or a minus lens)
            -Spasm of accommodation --the system is locked up creating “pseudo-myopia”
            -Exophoria with insufficient compensating vergence (patient over-accommodates to keep fusion)
            -Uncorrected or under corrected myopia
           
Unequal Results Between the Eyes
            -Monocular Amblyopia – Dr. S sees this quite a bit in her vision therapy practice where the                                   amblyopic eye shows a much higher than normal lag response
            -Anisometropia (unequal prescription) resulting in unequal accommodative demand
            -Incorrect binocular balance during the distance Rx
            -Adie’s Tonic Pupil (1 eye has loss of accommodation due to pupil abnormality)
           
Fluctuation of Response
            -Accommodative spasm
            -Loss of attention
            -Streff Syndrome – a condition where the patient has normal prescription but has difficulty seeing                                    at all ranges and even tunnel vision due to stress

Dr. S is a residency trained
Vision Therapist and Pediatric
Optometrist.  
Take Home: MEM retinoscopy is really a quick test to get set up once you have practiced a few times, and can tell you if there are focusing system problems in a short and efficient fashion.  Fused Cross Cylinder (FCC) is another test in the phoropter that can yield the same accommodative lag or lead results, but especially in young children this test can be difficult to get accurate or meaningful data. With FCC there is no way for you to actively tell if the patient is paying attention to the stimulus, and being behind the phoropter can really mess with a patient’s “normal” behavior pattern.  With MEM retinoscopy you can actively visualize the patient’s behavior, making it a more ideal method for gauging response.  Even if the patient struggles to read the card and stay focused long enough for you to perform a quick MEM, it can be telling.  If the child can’t stay focused long enough for MEM, then it could mean that they actively avoid near work because reading and near activities have been so difficult for them.  The patient could even be asymptomatic when you are discussing visual issues with them and their parent in the room because they have been avoiding all difficult activities (like reading)!

Stay tuned for more in office testing methods to come, enhanced by the insights of Dr. S.

3 comments:

  1. Hello! First, I am happy to find your blog, it it full of useful procedures and suggestions. Great job! But I have some questions to your text above.

    1) You wrote: "If you saw against, then do a quick retinopscopy sweep of the eye without any lens in place" - could you extend the procedure? (do the lens stay in front of eye etc.).
    2) Do you perform MEM under binocular or monocular observation? What are advantages of these viewing conditions?

    Thank you in advance

    ReplyDelete
    Replies
    1. Thanks for posting! Here's a few more details:
      1) You want to only briefly "dip" the lens in front of the patient to prevent their eyes from accommodating to the lens. If you hold the trial lens up too long, the patient will adjust to focus through it which may distort your results. You don't want to hold the trial lens up more than 2-3 seconds at a time.
      2) As the observer, you are just looking through the retinoscope so you are functionally monocular. I usually assess the patient with both of their eyes open as they read or do a matching game on the MEM cards. I dip the trial lens in front of the patient's right eye and assess the motion, then shift to the assess the left. Typically you would expect equal reflexes between each eye, but it's possible to get different results (Dr. S outlines the reasons why above).

      Delete
  2. Thank you doc. This is really a concise information

    ReplyDelete